Impact Resistant Skylights

Impact Resistant Skylights

As with our Architectural Structural Skylights we offer a wide selection of Florida and Miami Dade approved hurricane proof/impact resistant skylights for commercial, institutional, government and residential use. Impact resistant skylights, also known as high impact skylights,  are custom engineered to provide the safety required by the latest building codes for cyclic wind pressures and impact caused by hurricanes.

Our impact resistant skylights are available in two sided and four sided capture using both high impact rated laminated and insulating glass. Our previously installed systems have withstood a number of hurricanes with no resulting failure.

Skylight Concept impact resistant skylights are both Florida and Miami Dade approved skylights and meet requirements for the most stringent building codes. Should a project require extreme pressure loading we are able to offer project specific testing and one time approvals. As codes change we are constantly upgrading our systems and engineering to meet and exceed any requirements.

The impact resistant skylights have been tested for both small and large missile impact. By code, large missile resistance is a requirement for elevations less than 30 feet while above the elevations of 30 feet only small missile resistance is a requirement however we have gone beyond this minimum requirement and use large missile resistance regardless of elevation.

Click on the Photos to Learn More

Impact Resistant Skylights

Quarter Barrel Vault

  • Structures available up to 20 feet in width unsupported, in a variety of heights from low profile to full half round. Tube depth will vary based on span. Bay sizes may be adjusted to meet jobsite requirements or for cost savings.
  • Skylight systems are individually engineered for your custom project. All projects include shop drawings and engineering calculations. Units are designed and fabricated for fast assembly in the field. Systems are available in laminated, insulating and specialty glazing.
  • Concealed fasteners, closure flashings, interior condensate gutters, low profile retaining caps and butt glazing are standard items for the most aesthetically pleasing skylight system available.
Impact Resistant Skylights

Solariums

  • Structures available in custom widths and lengths, in a variety of pitches from 14 degrees to 75 degrees. Tube depth will vary based on span. Bay sizes may be adjusted to meet jobsite requirements or for cost savings.
  • Skylight systems are individually engineered for your custom project. All projects include shop drawings and engineering calculations. Units are designed and fabricated for fast assembly in the field. Systems are available in laminated, insulating and specialty glazing, hurricane resistant and Florida and Miami Dade Building Code approved.
  • Concealed fasteners, closure flashings, interior condensate gutters, low profile retaining caps and butt glazing are standard items for the most aesthetically pleasing skylight system available.
Impact Resistant Skylights

Structural Ridgelite with vertical ends

  • Structures available up to 40 feet in width unsupported, in a variety of pitches from 14 degrees to 75 degrees. Tube depth will vary based on span. Bay sizes may be adjusted to meet jobsite requirements or for cost savings.
  • Skylight systems are individually engineered for your custom project. All projects include shop drawings and engineering calculations. Units are designed and fabricated for fast assembly in the field. Systems are available in laminated, insulating and specialty glazing, hurricane resistant and Florida and Miami Dade Building Code approved.
  • Concealed fasteners, closure flashings, interior condensate gutters, low profile retaining caps and butt glazing are standard items for the most aesthetically pleasing skylight system available.
Impact Resistant Skylights

Structural Hip Ridge

  • Structures available up to 40 feet in width unsupported, in a variety of pitches from 14 degrees to 75 degrees. Tube depth will vary based on span. Bay sizes may be adjusted to meet jobsite requirements or for cost savings.
  • Skylight systems are individually engineered for your custom project. All projects include shop drawings and engineering calculations. Units are designed and fabricated for fast assembly in the field. Systems are available in laminated, insulating and specialty glazing, hurricane resistant and Florida and Miami Dade Building Code approved.
  • Concealed fasteners, closure flashings, interior condensate gutters, low profile retaining caps and butt glazing are standard items for the most aesthetically pleasing skylight system available.
Impact Resistant Skylights

Structural Polygonal

  • Structures available up to 40 feet in width unsupported, in a variety of heights from low profile to full half round. Tube depth will vary based on span. Bay sizes may be adjusted to meet jobsite requirements or for cost savings.
  • Skylight systems are individually engineered for your custom project. All projects include shop drawings and engineering calculations. Units are designed and fabricated for fast assembly in the field. Systems are available in laminated, insulating and specialty glazing.
  • Concealed fasteners, closure flashings, interior condensate gutters, low profile retaining caps and butt glazing are standard items for the most aesthetically pleasing skylight system available.
Impact Resistant Skylights

Structural Pyramid

  • Structures available up to 40 feet in width unsupported, in a variety of pitches from 14 degrees to 75 degrees. Tube depth will vary based on span. Bay sizes may be adjusted to meet jobsite requirements or for cost savings.
  • Skylight systems are individually engineered for your custom project. All projects include shop drawings and engineering calculations. Units are designed and fabricated for fast assembly in the field. Systems are available in laminated, insulating and specialty glazing, hurricane resistant and Florida and Miami Dade Building Code approved.
  • Concealed fasteners, closure flashings, interior condensate gutters, low profile retaining caps and butt glazing are standard items for the most aesthetically pleasing skylight system available.
Impact Resistant Skylights

Structural Ridgelite with no ends

  • Structures available up to 40 feet in width unsupported, in a variety of pitches from 14 degrees to 75 degrees. Tube depth will vary based on span. Bay sizes may be adjusted to meet jobsite requirements or for cost savings.
  • Skylight systems are individually engineered for your custom project. All projects include shop drawings and engineering calculations. Units are designed and fabricated for fast assembly in the field. Systems are available in laminated, insulating and specialty glazing, hurricane resistant and Florida and Miami Dade Building Code approved.
  • Concealed fasteners, closure flashings, interior condensate gutters, low profile retaining caps and butt glazing are standard items for the most aesthetically pleasing skylight system available
Impact Resistant Skylights

Structural Segmented Barrel Vault

  • Structures available up to 40 feet in width unsupported, in a variety of heights from low profile to full half round. Tube depth will vary based on span. Bay sizes may be adjusted to meet jobsite requirements or for cost savings.
  • Skylight systems are individually engineered for your custom project. All projects include shop drawings and engineering calculations. Units are designed and fabricated for fast assembly in the field. Systems are available in laminated, insulating and specialty glazing, hurricane resistant and Florida and Miami Dade Building Code approved.
  • Concealed fasteners, closure flashings, interior condensate gutters, low profile retaining caps and butt glazing are standard items for the most aesthetically pleasing skylight system available.
Impact Resistant Skylights

Structural Slope Glazed

  • Structures available up to 40 feet in width unsupported, in a variety of pitches from 14 degrees to 75 degrees. Tube depth will vary based on span. Bay sizes may be adjusted to meet jobsite requirements or for cost savings.
  • Skylight systems are individually engineered for your custom project. All projects include shop drawings and engineering calculations. Units are designed and fabricated for fast assembly in the field. Systems are available in laminated, insulating and specialty glazing, hurricane resistant and Florida and Miami Dade Building Code approved.
  • Concealed fasteners, closure flashings, interior condensate gutters, low profile retaining caps and butt glazing are standard items for the most aesthetically pleasing skylight system available.
Impact Resistant Skylights

Structural Slope Glazed with vertical ends

  • Structures available up to 20 feet in width unsupported, in a variety of pitches from 14 degrees to 75 degrees. Tube depth will vary based on span. Bay sizes may be adjusted to meet jobsite requirements or for cost savings.
  • Skylight systems are individually engineered for your custom project. All projects include shop drawings and engineering calculations. Units are designed and fabricated for fast assembly in the field. Systems are available in laminated, insulating and specialty glazing, hurricane resistant and Florida and Miami Dade Building Code approved.
  • Concealed fasteners, closure flashings, interior condensate gutters, low profile retaining caps and butt glazing are standard items for the most aesthetically pleasing skylight system available.